CGOLDENWALL Cross Hatch Adhesion Tester Blade Cutt Kit 531622849550

( Brand: Cgoldenwall ), ( Part Type: Blade Kit ), ( Color: Sliver ), ( UPC: 531622849550 ), ( Package Dimensions Lxwxh: 11.97x8.19x3.19 Inches ), ( Weight: 1.85 Pounds )

Review CGOLDENWALL Cross Hatch Adhesion Tester cut Kit Multi blade Cutt

The CGoldenWall 531622849550 Cross Hatch Adhesion Tester Cross-Cut Kit Multi-Blade Cutter is an essential tool for any professional in the field of adhesive testing and quality control. This versatile kit comes with a multi-blade cutter that allows for precise and consistent cross-hatched cuts on various surfaces, enabling accurate adhesion testing.

The multi-blade cutter is made of high-quality stainless steel, ensuring durability and longevity. It features adjustable blade tension, allowing for easy blade changes and ensuring a consistent cut depth. The kit includes a variety of replaceable blades, ensuring compatibility with different adhesive types and surface textures.

The CGoldenWall Cross Hatch Adhesion Tester Kit also includes a user-friendly digital tester, which measures the force required to remove the cross-hatched adhesive sample. The digital display is easy to read, providing accurate results within seconds. The tester is powered by 2 AA batteries, which are included in the kit.

The kit is compact and portable, making it easy to carry around for on-site testing. It also comes with a sturdy carrying case, protecting the components during transportation and storage. The case is lightweight and durable, ensuring that the kit withstands the rigors of regular use.

In summary, the CGoldenWall 531622849550 Cross Hatch Adhesion Tester Cross-Cut Kit Multi-Blade Cutter is a comprehensive and reliable solution for adhesion testing. Its high-quality components, adjustable blade tension, and user-friendly digital tester make it an essential tool for any professional in the field of adhesives and coatings.

1. Versatility: The multi-blade cutter allows for various cross-hatch patterns, making it suitable for testing adhesion on a wide range of surfaces.

2. Durable Material: Made of high-quality ABS material, the tester is expected to be durable and long-lasting.

3. Easy to Use: The kit includes a user-friendly handbook, making it straightforward for beginners to use.

4. Cost-Effective: Being an all-in-one kit, it could be more cost-efficient compared to purchasing individual components.

1. Limited Blade Number: Although the kit includes multiple blades for various patterns, the number may not be sufficient for heavy-duty usage.

2. Potential Blade Wear: Due to the nature of the material and the intensive use of the tester, the blades might wear out relatively quickly.

3. Limited Adhesive Testing Capabilities: While the tester can test a variety of surfaces, it may not be suitable for testing all types of adhesives.

The CGoldenwall 531622849550 Cross Hatch Adhesion Tester Cross-Cut Kit Multi-Blade Cutter is a practical and cost-effective choice for those who need to test adhesion on various surfaces. However, users should be aware of the potential limitations, such as the number of blades and the types of adhesives that can be tested. Regular replacement of the blades may be necessary to ensure accurate testing results.

If you are looking for an affordable and versatile adhesion tester, the CGoldenwall 531622849550 Cross Hatch Adhesion Tester Cross-Cut Kit Multi-Blade Cutter could be a suitable option. However, consider the frequency of use and the specific adhesives you plan to test before making a final decision.

Details:

If it need to replace the multi-blade cutter, use screwdriver unscrew two screws on cutter body and change affix edge of handle, then tighten. The test should be taken at least in three different locations on the piece. Operation and user instruction: Placing the test piece on a tablet of sufficient hardness. Package: 1 x Carrying case, Cross Hatch Cutter Handle, roll of 3M Transparent Tape, Multi-blade cutter spacing: 0.01mm, 2 0.01mm,3 addendum straightness: 0.003mm 0.006mm.

If the coating is too thick and hard to penetrate in substrate, then test invalid. Brushing the two diagonals of grid lattice graphics by using soft brush gently backward and forward each five times. If the results of three positions are different, test should be repeated in more than positions, and record all. Note: All the incision should penetrate coating, cut into substrate but must not be too deep.

Multi-blade cutter tooth tip width : 0.05mm. Rotating the test piece to 90, repeating above operations, so as enable cut a grid lattice graphics. In some special situation or requirements, it must be compatible with the tape method for final determination. Holding the handle of program grid, keeping multi-blade cutter perpendicular to plane test piece.

Put the tape over whole grid, then tear off it at minimum angle, result can be obtained according to film surface by adhesive peeling area ratio. By using the uniform force, with manner of not fibrillation and balance 20-50mm/S cutting speed to draw.

specifications mixedtoolsetse:

• brand: Cgoldenwall
• part type: Blade Kit
• color: Sliver
• upc: 531622849550
• package dimensions lxwxh: 11.97x8.19x3.19 Inches
• weight: 1.85 Pounds

payments mixedtoolsetse:

• wallet: Apple-pay
• other
• credit card: Visa

general mixedtoolsetse:

• condition: New
• Tools Workshop Equipment > Hand Tools > Hand Tool Sets

returns mixedtoolsetse:

• paid by: Seller
• policy: Returns Accepted
• method: Money back
• time: 30 Days

shipping mixedtoolsetse:

• transit: 11-16 Days
• carrier: USPS
• service: USPS Ground Advantage
• class: Standard
• type: Fixed
• cost: $0.00

seller mixedtoolsetse:

• rating: 100.0%
• # reviews: 103
• city: Brentwood, New York

offer mixedtoolsetse:

• options: Ship-to-home
• started: September 16, 2024
• sold: 0
• quantity: 1
• availability: In Stock

Cgoldenwall 531622849550 Is Similar To:

• Cgoldenwall 445046034023 Cross Hatch Adhesion Tester Cross-cut Kit Multi-blade (85.7% similar) Multi-blade cutter spacing: 1/0 .01MM, 2/0 .01MM,3 0.01MM. In some special situation or requirements, it must be compatible with the tape method for final determination.: precautions: all the incision should penetrate coating, cut into substrate but must not be too deep. It is a standing adhesion ...(September 14th, 2024)